172.18.10.6 belongs to 172.16.0.0/12, the mid-size range RFC 1918 reserves for private networks. It spans 172.16.x.x through 172.31.x.x — 1,048,576 addresses under a 255.240.0.0 netmask — and is never routed on the public internet, so no registrar, ISP or country owns this address.
172.18.10.6 sits inside the 172.18.10.0/24 subnet, whose usable addresses run from 172.18.10.1 to 172.18.10.254. This block is common in mid-size business networks, lab environments, VPN subnets and Docker's default bridge network. It is often mistaken for public space, because 172.x.x.x addresses outside 172.16–172.31 are routable.
To open the admin panel, type 172.18.10.6 into your browser's address bar. If the page does not load, this is probably not the gateway address on your network — see the checks below. http://172.18.10.6
We hold no reported default credentials for 172.18.10.6. That is not a gap to fill with a guess: no vendor is documented as shipping this address as a factory default, so any list published for it would be invented. The credentials you need belong to whichever device holds this address on your own network.
Where to find them:
A factory reset restores the device's original admin password, which is the one printed on its label. It also erases every setting you have changed: the Wi-Fi network name and password revert to the label values, port forwarding and static leases are cleared, and any device connected over Wi-Fi will need to rejoin with the original key. Treat it as a last resort.
Type 172.18.10.6 into your browser's address bar and press Enter. Type it by hand rather than accepting an autocomplete suggestion, which often fills in a different address you visited before.
If the browser reports that it cannot reach 172.18.10.6, this is not the gateway address on your network. On Windows run ipconfig /all and read the Default Gateway line; on macOS open System Settings, Network, Details, TCP/IP; on Linux run ip route and read the address after "default via".
If the login page loads but rejects your credentials, and you have never changed them, use the defaults printed on the device's label. If they have been changed and nobody knows the new password, a factory reset is the only way back in.
The 172.18.10.0/24 subnet runs from 172.18.10.1 to 172.18.10.254, with 172.18.10.255 reserved as the broadcast address. These are the addresses in it we hold router login details for.
12 addresses in this subnet have a page; the most looked-up are listed here.
~$ curl https://www.proxydocker.com/api/v2/free/8.8.8.8
{
"ipAddress": "8.8.8.8",
"countryCode": "US",
"countryName": "United States",
"stateProv": "California",
"city": "Mountain View"
}The free API is limited to 500 daily requests and returns city-level location data only. For larger volumes or more data such as latitude/longitude, ISP details and proxy detection, see our commercial offers.
Copyright © 2026 Proxydocker.com, all rights reserved. · Privacy policy · Affiliate program